38 Spirit Bvd, Cranbourne East VIC 3977, Australia

How to Install Bathroom Vanity and Faucets

Share This Post

Are you looking to install a bathroom vanity all yourself? Well, this could be a good idea if you are looking to save some money. Generally, people get a new bathroom vanity during their bathroom renovation, and the remodelling contractors handle the job well enough. 

However, if you are looking to install a bathroom vanity, you need to take care of some important elements. Here is a detailed DIY guide on how to install a bathroom vanity to get the best outcomes:

Before Installing a Bathroom Vanity

Before you install a bathroom vanity, you need to measure the available area in your bathroom very carefully. The height, width and depth of the vanity are taken into consideration and you can choose from the standard sizes bathroom vanity available.

Besides, you also need to choose from single and double vanities, pick appropriate colours for your vanity and also get installation equipment for the process.

If you already have a vanity in your bathroom and you just need to replace it with a new one, you can measure the size of the existing vanity. Based on this, you can get a new design or size according to your needs.

When choosing a new vanity in the store, make sure you keep in mind the size considerations. Besides, whether or not you need something with an attached top and the faucets. Not to forget, you need to keep track of the style and the design of the bathroom vanity according to the design and colour scheme of your bathroom.

Steps to Install Bathroom Vanity

Here are some important steps that you can follow when installing or replacing a bathroom vanity:

Step 1: Disconnect and Remove the Old Vanity

The first step in the process would be the removal of the old vanity. And for this, you need to shut off the water supply using the valves that are mainly under the sink. If you do not have water supply valves, you can turn off the mains.

Next, you can place a tumbler to catch any extra water and using a wrench, you need to loosen the slip nut in the pipeline. Following this, use the wrench to disconnect the lines that supply water. 

With a sharp blade, cut the sealant that lies along the backsplash and lift the sink or the top of the vanity to remove it from the wall. You may need to use your drill to remove the screws from the wall and keep your old vanity securely so it can be sold to a recycler.

Step 2: Install the New Vanity

Most bathroom vanities arrive with the manufacturer’s details on how to install them. You can read these details carefully to install the new vanity easily.

Look for some pre-drilled holes in the bathroom vanity. Or else, you can drill the holes according to your needs. Place the vanity in the desired place and make an outline on the wall. Find the studs in the vanity and mark them.

Next, level the vanity and drill holes for the supply pipes and the drain pipes. Attach the vanity to the wall using screws and you can also use anchors to keep it more secure. Recheck the level of the vanity and trim the shims using a sharp blade.

Step 3: Install the Faucets:

The next step would be the installation of faucets and for this, you need to assemble the faucets and the drain on the sink. Position the plastic gasket and screw the faucets using the fastening nuts. Next, place the faucets at the stipulated homes on the vanity top. Make sure to attach the supply line for water with the help of a wrench.

Some of the vanities arrive with inbuilt faucets and you can get these to install the vanity directly with the faucets.

Step 4: Fasten the Vanity Top

If you opted for a bathroom vanity base or a vanity that has no attached top, you need to attach the vanity top over it. For this, make sure the vanity stands in its correct position and there are no gaps between the vanity and the wall. 

Put some silicone caulk on the cabinet top, set the vanity top in position and press it with some force. Make sure the top of the vanity is on a level and you can add a backsplash if you think it is needed.

Step 5: Attach the Water Supply Again

Connect the supply of water to the faucet supply lines. Turn on the water supply and check if there are any leaks. You can install the pop-up drain after that.

And ta-da, you have the perfectly installed bathroom vanity that is ready to add splendour to your bathroom. You can proudly say that you installed the vanity all yourself and this would surely surprise your guests.

However, you might know that installing even the smallest of bathroom vanities is a tedious job. Plus, you need some working experience and even some handy equipment for the process. Besides, you might not be able to achieve the results you desire.

So it’s better to get professional assistance during your bathroom remodelling job and get the vanity installed by the contractors. For instance, if you are looking to get bathroom renovation in Melbourne, you can contact Home Renovation Expert for assistance. 

The experts will assist you in getting a renovated bathroom at the most affordable cost and even help you make minor changes to deliver the design that you always wished for. Would you rather install the vanity yourself or get professional assistance for the process?

Subscribe To Our Newsletter

Get updates and learn from the best

More To Explore

Do You Want To Boost Your Business?

drop us a line and keep in touch

Need help? Call our award-winning support team 24/7 at 0499 833 366

Home Renovations Expert is a premier destination for transforming houses into stunning dream homes. With a highly skilled team of dedicated professionals and a wealth of industry experience, we take immense pride in delivering unparallelled home renovation services across various suburbs in Melbourne.

Important Links